components:

a) 5 small aluminum sticks, each one in two parts 2 parti connectable to each other
b) one larger aluminum stick, in 3 parts connectable to each other
c) tent with white roof and black walls ,
d) double plastic can connected to the highest part of the tent roof
e) 8 pegs to drive into the ground, nylon cord to fasten the tent to the pegs

setting up:
1)assemble the large stick by connecting the 3 parts, at the bottom the one with the tip and in the center
the one with the metal ring. The 3 parts detach easily during assembly. We suggest holding them
together with a small piece of scotch tape. Insert the stick into the central edge of the black tent, plant
the tip of the stick lightly in the ground, fasten a nylon cord to the ring in the middle of the stick and
secure it to the ground with a stake.

2)connect the 5 copies of small aluminum sticks, with the ring at the top and the tip at the bottom. The
two parts detach easily during assembly. We suggest holding them together with a small piece of scotch
tape. Thread the sticks into the appropriate edges of the black curtain. Plant the tip of the stick lightly
in the ground, fasten a nylon cord to the ring and secure it to the ground with a stake. It is important to
pass the cord not only in the metal rings, but also in the fabric eyelets that are at the corners of the roof.
At this point the tent stands up.

3) secure the central black curtain to the ground with 2 pegs

4) unscrew the low jar, fill it about a third with the liquid (diluted alcohol, beer, or other) and screw it back
on